vegasnortel
Vendor
What is the stepps to program the system (nortel software 6.1) to forward to cell phone. Right now only can forward to internal extention.
(all lines are analoge)
Thanks
(all lines are analoge)
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Forward to cell Phone
- Thread starter vegasnortel
- Start date
- Status
1 - Create a destination code (9 for example) and program it to use route 001. Absorb length = all.
2 - Program route 001 to dial out on pool A, assuming all your lines are pooled.
3 - Allow redirect to the extension doing the forwarding
4 - Make sure all lines have supervision set to Y
5 - Then you can dial F4, dial 9, and dial the destination phone number.
6 - Dial F#4 to cancel forward.
Brian Cox
(updated 3-13-09)
(updated 3-13-09)
2 - Program route 001 to dial out on pool A, assuming all your lines are pooled.
3 - Allow redirect to the extension doing the forwarding
4 - Make sure all lines have supervision set to Y
5 - Then you can dial F4, dial 9, and dial the destination phone number.
6 - Dial F#4 to cancel forward.
Brian Cox
(updated 3-13-09)
(updated 3-13-09)
- Status
Similar threads
- Locked
- Question