CALL FORWARD OFF NET LDK20

[elziotech]

Excuse me!!

ldk 20 with 2 analog line !!!

call forward anf transf off-net is possible?

example

54 + 8 + number off-net ? is possible?

thank you!!

bye

 

[elziotech]

Analogue CO Lines

 

[morenot]

This is part of ipldk 60 manual:


2.3.1 Call Forward
Description
A Station User can forward calls to any Station, Station Group, or VMIB in the system by activating feature
codes. There are several types of Call Forwarding: Unconditional, Busy, No answer, Busy/No Answer,
Unconditional Station Off-Net Call Forward, No Answer Station Off-Net Call Forward, Unconditional Station
Off-Net Call Forward with Tel Number, No Answer Station Off-Net Call Forward with Tel Number, Incoming CO
Off-Net Call Forward, and Follow Me Call Forward.

Operation
To activate Call Forward, follow Operation directions in each sub-heading for this section.
To program Call Forward to a Flexible Button, perform the following:
1. Press the [TRANS/FOR] button.
2. Press the flexible button to be assigned.
3. Press the [TRANS/FOR] button.
4. Assign the Call Forward type:
? 1 = Call Forward, Unconditional
? 2 = Call Forward, Busy
? 3 = Call Forward, No Answer
? 4 = Call Forward, Busy/No Answer
? 5 = Unconditional Station Off-Net Call Forward
? 6 = No Answer Station Off-Net Call Forward
? 7 = Incoming CO Off-Net Call Forward
? 8 = Unconditional Station Off-Net Call Forward with Tel Number
? 9 = No Answer Station Off-Net Call Forward with Tel Number
? 0 = Follow Me Call forward
5. Dial the destination that will receive the call.
6. Press the [HOLD/SAVE] button.

To deactivate Call Forward, perform the following Steps:
1. Lift the handset or press the [MON] button.
2. Press the [DND/FOR] button.
3. Press the # key (Call Forward cancel code).

Condition
? To use Call Forward, a Station should be activated in Admin Programming.

Admin Programming
1. Allow Off-Net Call Forward (PGM 111 – FLEX18)
2. Authorization Code Table (PGM 227)


2.3.1.6 Call Forward, Station Off-net with Tel Num (Unconditional, No answer)
Description
Stations allowed call forward access can forward intercom and transferred CO Line calls to a directory number
(telephone number) outside of the system. When a call is received, the system will access an outgoing CO
Line and dial the telephone number entered by the user.
If a station assigned off-net call forward received a call from internal caller and external caller, the call is
forwarded to off-net unconditionally (Code 8) or after No Answer Ring timer is expired (Code 9).

Operation
To activate unconditional Off-Net Call Forward,
1. Lift handset or press the [MON] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward Code 8.
4. Seize a CO Line, if required.
5. Dial the desired phone number instead of speed bin.
6. Replace the handset and go on-hook.

To activate no answer off-net call forward,
1. Lift handset or press the [MON] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward Code 9.
4. Seize a CO Line, if required.
5. Dial the desired phone number instead of speed bin.
6. Replace the handset and go on-hook.

To deactivate Call Forward,
1. Lift the handset or press the [MON] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward Cancel Code #.

Condition
? The entered telephone number will be automatically assigned to a station speed bin, but the telephone number
cannot be erased or edited from the normal speed bin programming mode.
? The assigned station speed bin will be deleted automatically when the user cancel this function.

Saludos..

JLMT//

 

[elziotech]

with Analogue CO Lines ?

thank you

bye

 

[morenot]

Try....