NorstarOption
Technical User
I'm trying to test COTS remotely but can't break the dial tone when I pickup the call and try to dial number. Is there a CLS I need to enable on my set to make it work?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Command
- Thread starter NorstarOption
- Start date
- Status
LD 36
CALL
9xxxxxxx
Your phone should ring and you answer it
then type
TRK
XX XX XX XX
You should then get dialtone, at this point you can either dial on that trunk or * to drop the Trunk.
You just need MTA in the CLS of one phone on site
OLD ROLMEN WORKING ON NORTELS AND AVAYA
CALL
9xxxxxxx
Your phone should ring and you answer it
then type
TRK
XX XX XX XX
You should then get dialtone, at this point you can either dial on that trunk or * to drop the Trunk.
You just need MTA in the CLS of one phone on site
OLD ROLMEN WORKING ON NORTELS AND AVAYA
- Thread starter
- #3
NorstarOption
Technical User
I tried this in LD 36.
call + TN
DN? my number
phone rings, but when I pick up the call and try to dial a number or trk, I can't break the dial tone.
call + TN
DN? my number
phone rings, but when I pick up the call and try to dial a number or trk, I can't break the dial tone.
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question
