diegosaletti
Programmer
Good afternoon fellow.
See if you can help me:
I have a IPO500v2 8.0.46 working with an E1-R2, 30 channels.
Incoming calls work normally, but when making outgoing calls to occupy the channel E1 connection is already disconnected, the signal is correct.
Could you help me with this?
thank you in advance for your help.
See if you can help me:
I have a IPO500v2 8.0.46 working with an E1-R2, 30 channels.
Incoming calls work normally, but when making outgoing calls to occupy the channel E1 connection is already disconnected, the signal is correct.
Could you help me with this?
thank you in advance for your help.