eproviders
Programmer
What kind of cable do I need to use winspm for programming?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cable for Winspm
- Thread starter eproviders
- Start date
- Status
telecomtekperson
Vendor
A Null Modem cable and a 355a adaptor...
tdaugirdas
Technical User
OR - you can use WinSPM by connecting a regular RJ11 patch cord from your computer's modem to an open port on an 012 or 106 T/R card - much less complicated if you are on site. You will see those two options under "direct connect": via the admin port OR via modem.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
Tom Daugirdas,
President
STCG, Inc.
stcg.com
Why a null modem cable? Just use a 355a and a cpu patch cable (straight thru). You may have to use a 25 to 9 pin adapter.The modem Ideal is O.K. to use as well but some laptops built in modems don't work that well. I use the admin port when I go onsite.I admin our Magix thru my desk top modem that gets dial tone from an 016TR, it is also the cpu I use to admin cutomers systems from our office.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question