Buying network module,

[Stingreen]

we've got a cisco 2600 router and need a network module. The one I found on the web is very big for the router.

Check the image,

http://images.prosperpoint.com/images/2560/129007-314.jpg

Now, I need an "ethernet module" which should be a smaller version of this one,
Any ideas where I can find one ?
Basicly I'm going to put this module instead of the WAN Module we already have.
Thank you!

 

[ITsmyfault]

the module you have pictured is an ethernet module. What you probably would want is one of these with a WAN card slot in it, such as a NM 1FE-2W (to make good use of the space). Check your IOS version to see what it supports card wise and also what your router will support. (older IOS will not support the fast ethernet modules for ex..) Your 2600 (depending on model) probably has 1 or 2 WIC slots (the smaller slots in back) already that can take ISDN, serial, T1 etc cards.
hth

Joe

 

[Papa4]

You can take a look at

http://www.lordsnet.com

for used Cisco hardware at cheap prices. I have talked with a man named
Teak there and he is real easy to talk to and willing to
offer suggestions.

 

[RJ45100BT]

Also, that 2600 should have a 2W wan slot in it.

Which will support the large blade.