Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
business card setup 1
- Thread starter maggie2
- Start date
Instructions refer to Draw V10 but I think are similar to previous and later versions.
1. Make your page size the size of card.
2. Design card as normal.
3. Add additional cards/pages using the + key (bottom left)
4. At print time from print preview use imposition layout tool and along top of page you can choose number up and along
5. Click Edit basic settings and from drop down choose "gutters and finishing" Red line determines which gutter is altered
6. Click on number and type in different number for different number configeration ie 4 up but 3 times page1 - 1 page2
7. Click on red arrow if you need cards upside down ie to make head to head
This print function in Draw is for me one of its major features, does even Quark or Indesign do this, this easy?
Alan
1. Make your page size the size of card.
2. Design card as normal.
3. Add additional cards/pages using the + key (bottom left)
4. At print time from print preview use imposition layout tool and along top of page you can choose number up and along
5. Click Edit basic settings and from drop down choose "gutters and finishing" Red line determines which gutter is altered
6. Click on number and type in different number for different number configeration ie 4 up but 3 times page1 - 1 page2
7. Click on red arrow if you need cards upside down ie to make head to head
This print function in Draw is for me one of its major features, does even Quark or Indesign do this, this easy?
Alan
-
1
- #3
javabearSTL
IS-IT--Management
You can also setup your page via the Layout|Page Setup area and choose Labels. Then see if there are any business card layouts for your country. I know there are biz card layouts for the US in there.
If you find one of those there, it will show only one lablel, but when you print it will do 10-up.
Another way is to just customize the page layout to the size of your card (don't forget your bleed if needed) and then when you do File|Print go to the Layout tab and click Edit at the bottom of the tab area where it says Imposition Layout. Then on the Property Bar you'll see two areas with a "1" in it. Click on the up/down arrows to add/delete the # of times the item will be printed on the page.
You can then print out what you need. Of course, if you're sending this to a printer to do, just give them a PDF or EPS of the file as a single card and they will do the imposition.
If you find one of those there, it will show only one lablel, but when you print it will do 10-up.
Another way is to just customize the page layout to the size of your card (don't forget your bleed if needed) and then when you do File|Print go to the Layout tab and click Edit at the bottom of the tab area where it says Imposition Layout. Then on the Property Bar you'll see two areas with a "1" in it. Click on the up/down arrows to add/delete the # of times the item will be printed on the page.
You can then print out what you need. Of course, if you're sending this to a printer to do, just give them a PDF or EPS of the file as a single card and they will do the imposition.
- Thread starter
- #4
javabearSTL
IS-IT--Management
You'll want to be more specific, then, when you ask for help. Draw is up to version 12. Unless you specifically mention your version, people will presume you're using the most current release.
I never used v8, but I have v7 and 9 thru 12... v9 has the imposition tool. v7 has something like the imposition tool, but not in the very usable form that versions 9 and above have.
I never used v8, but I have v7 and 9 thru 12... v9 has the imposition tool. v7 has something like the imposition tool, but not in the very usable form that versions 9 and above have.
- Status