Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bugs

Status
Not open for further replies.

Riaanl

Vendor
Joined
Feb 17, 2005
Messages
155
Location
ZA
Hi Guys
I get the following 2 bugs.

BUG4216
BUG4216 : 11 0 0 2 00009EEC FFFFFFFF
BUG4216 + 106C4A44 105CF946 105CF81C 105C2966 105C008C
BUG4216 + 10F0B32E 10F0AE5E 10F0AD74 10F0A6B4 10F057C8
BUG4216 + 10EFFCC2

This is what nortel says.

Cause:
BUG4216 is output only when DSET_INVALID_INP overflows. BUG4216 only prints the TN that caused the overflow, not all the contributors.


Fix:

Call Nortel Networks Customer Support for your region and refer them to this primus solution NORT130315. A list of contact numbers is available in the left-hand margin of the web page.



BUG253
BUG253 : 53
BUG253 + 106C4A44 106A1DC6 10833A84 10832BFA 10831082
BUG253 + 102C7AE4 105C907C 105C2DFA 105C008C 10F0B32E
BUG253 + 10F0AE5E 10F0AD74 10F0A6B4 10F057C8 10EFFCC2

NOt sure what this one is.......

Thanks
Riaan
 
rls and switch type, plus added apps? cp voip etc

john poole
bellsouth business
columbia,sc
 
1000M RLs 3.0 - MC Card and Signalling Server. Also running Agent Dialer and ICM
 
thanks, i'll file a copy of your fyi, running the same rls on an 81 but haven't had that bug bite me (yet)

john poole
bellsouth business
columbia,sc
 
Thanks. I don't think it is to serious - otherwise I would have had a user or 3 on my back....he he....
 
always serious if it happens enough to fill a ram up and give a free ini at 11:00 for a brokerage... i never allow problems to go un-addressed, from the school that most problems in a nortel can be addressed before the user has time to scream

john poole
bellsouth business
columbia,sc
 
If you didn't find any info about the message

BUG0253
Utility procedure called with invalid required data.
Parameters: global number and optional debugging parameters.
Action: Report the problem text to the operating company.

I would have suggested to upgrade to latest available SS and MC software and install the latest pathes on the SS and MC. There are a few of them made that actually solves minor problems.

i2007
 
Will check the pep site and see.
Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top