bug 201 with msdl 201 x

[Tbrandes]

I'm receiving a bug 201 with and associated msdl 201 7 000000 error every couple of minutes. Does any one know what this is? The message definition is pretty vague. Do I need to disable and reenable the msdl 7? It has two d-channels programmed on it. Using a opt 61c with PRI's

Thanks in advance..

 

[Reusser]

yes - disable MSDl

lD 96
DIS MSDL 7 all

run self test

SLFT MSDL 7


Enable with force down load

ENL MSDL 7 FDL

enable dchannels and test T1
If after that you are still getting them need to replace card. or maybe reseat card first. Most likely FDL will clear.