Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BS 370 installation
- Thread starter new2md
- Start date
Basically you only need to power up the base, then it will lock to the strongest dect system. When the base has locked to a dect system only the lower LED will be lit.
By the way, you are not using a dect bases/phones on a non european frequency band? As far as I know, the BS370 will only work on the european frequency band (1880-1900 MHz).
By the way, you are not using a dect bases/phones on a non european frequency band? As far as I know, the BS370 will only work on the european frequency band (1880-1900 MHz).
singhbrindisi
Technical User
Hi,
Latest FW for ELU31 is R11A, Try to upgrade that as well..
Also in recent time , I have seen DECT telephony in MD 110 is very sensitive for clocking... In latest installation I put the ELU 31 on the magazine where I was getting the Sync from PSTN... & Guess, it worked without any hassle...
Cheers,
""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""
Latest FW for ELU31 is R11A, Try to upgrade that as well..
Also in recent time , I have seen DECT telephony in MD 110 is very sensitive for clocking... In latest installation I put the ELU 31 on the magazine where I was getting the Sync from PSTN... & Guess, it worked without any hassle...
Cheers,
""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""
- Thread starter
- #4
Etompau you are adding to my knowledge. How do I find which frequency band is used.I don't find any documentation in Alex.
BS 370 is powering up with same status as you mentioned. Call is also made through that BS. But within a minute first speech is gone and then call is dropped, although i can see signal bars.
Singh Brindisi, this setup is working okay on another site with same FW and without external clocking.
Any more suggestions please !
BS 370 is powering up with same status as you mentioned. Call is also made through that BS. But within a minute first speech is gone and then call is dropped, although i can see signal bars.
Singh Brindisi, this setup is working okay on another site with same FW and without external clocking.
Any more suggestions please !
- Thread starter
- #5
Etompau you are adding to my knowledge. How do I find which frequency band is used.I don't find any documentation in Alex.
BS 370 is powering up with same status as you mentioned. Call is also made through that BS. But within a minute first speech is gone and then call is dropped, although i can see signal bars.
Singh Brindisi, this setup is working okay on another site with same FW and without external clocking.
Any more suggestions please !
BS 370 is powering up with same status as you mentioned. Call is also made through that BS. But within a minute first speech is gone and then call is dropped, although i can see signal bars.
Singh Brindisi, this setup is working okay on another site with same FW and without external clocking.
Any more suggestions please !
Look at the type number label on your base.
From Alex:
NTM/KRCNB 301 03/1 with GAP SW for frequencies between 1880-1900 MHz and
NTM/KRCNB 301 02/1 with GAP SW for frequencies between 1900-1920 MHz and
NTM/KRCNB 301 04/1 with GAP SW for frequencies between 1910-1930 MHz.
From Alex:
NTM/KRCNB 301 03/1 with GAP SW for frequencies between 1880-1900 MHz and
NTM/KRCNB 301 02/1 with GAP SW for frequencies between 1900-1920 MHz and
NTM/KRCNB 301 04/1 with GAP SW for frequencies between 1910-1930 MHz.
- Thread starter
- #7
Hi! Etompau,
My BS 340 label says NTM/KRCNB 302 01/1 R4B and
BS 370 says NTM/KRCNB 303 01/1 R3A
All this does not match with your description.
The WRS shows an activity/no activity on upper green LED and I loose all 5 bars with an immediate return a kind of fluctuating signal.
The link info 'Q' from the BSM and WRS toggles very fast between 00-20 also i see some values like 1a to 1f.
your further help will be appreciated
My BS 340 label says NTM/KRCNB 302 01/1 R4B and
BS 370 says NTM/KRCNB 303 01/1 R3A
All this does not match with your description.
The WRS shows an activity/no activity on upper green LED and I loose all 5 bars with an immediate return a kind of fluctuating signal.
The link info 'Q' from the BSM and WRS toggles very fast between 00-20 also i see some values like 1a to 1f.
your further help will be appreciated
- Status
Similar threads
