Browsing accross Wan

[hande]

I have two networks that are connected together via a 2 Mbp circuit with routes every thing is working appart from the fact I am unable to browse that network in my browser I can only see things on my side of the network and the same happens over their? Whats happened?

Thanks In Advance

Dominic

 

[cmegha2001]

We have had the same issue... We resloved this by adding a WINS Server on each LAN then configure each WIN Server as a pus/pull partner with each other. Clients on each LAN in TCP/IP prop and listed the local WIN Server.

Also Make sure the default gateway is that of the router that is going to your second location, on each LAN.

You might have to do some router config... So the right request goes to the right place. IE Our WAN router any packets destination 192.168.0.x goes to our WAN site all other request then goes to Internet Router. Hope this helps.

CMegha