I have a tape that is seq.#3 with session 4 on it...5 tapes in the sequence. I need to restore session 4 from tape 3. Tape 5 has been overwritten and, each time I try to merge/restore...it wants tape 5. I am able to scan tape 3 and see my data...any ideas on how to merge or restore from tape 3?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
brightstor V 10.0 can't merge or restore from tape
- Thread starter dallas66
- Start date
davidmichel
Technical User
The full path will be a little different but try this.
Merge
Open regidt32.exe
Go to HKEY_LOCAL_MACHINE on Local Machine
Open it to
HKEY_LOCAL_MACHINE\SOFTWARE\ComputerAssociates\ARCserveIT\Base\Task
Highlight Task and select Edit Add Key from the menue bar.
Key Name: Merge
Class: <leave blank>
Hightlight Merge and select Edit Add Value
Value Name: DonotUseCatalogMerge
Data Type: REG_DWORD
click OK
Data: 1 *// 1 = Enabled, 0 = Disabled
Merge
Open regidt32.exe
Go to HKEY_LOCAL_MACHINE on Local Machine
Open it to
HKEY_LOCAL_MACHINE\SOFTWARE\ComputerAssociates\ARCserveIT\Base\Task
Highlight Task and select Edit Add Key from the menue bar.
Key Name: Merge
Class: <leave blank>
Hightlight Merge and select Edit Add Value
Value Name: DonotUseCatalogMerge
Data Type: REG_DWORD
click OK
Data: 1 *// 1 = Enabled, 0 = Disabled
- Status
Similar threads
- Locked
- Question