bridge appearence not working on sip

[1a22ip]

New to SIP! Assigned bridge appearances but they don't work inbound. I can complete calls outgoing. Did I miss something?

Thanks in advance
ED

1a2 to ip I seen it all

 

[bleebrant]

When you say they don't work, do you mean there is no indication at all of the inbound call?

 

[dignoffo]

1a22ip,

I am assuming you have a Session Manager with a CM Evolution server.

Bridged appearances on SIP endpoints are controlled in the OPS-station mapping. Change setting bridged calls to "both" second page change of screen.

 

[1a22ip]

Thanks for the replies: dignoffo I changed this setting and still no joy. any other suggestions? BTW Message waiting not working either!

1a2 to ip I seen it all

 

[dignoffo]

1a22ip,

I assume you have bridged calling alert and per button calling alert set and to y on SIP station screen.

 

[1a22ip]

I don't have an option for Per button Ring control. I do have bridge call alerting and it's checked. I have both options in CM checked.

Thanks


1a2 to ip I seen it all

 

[JayNEC]

Do you have CM assigned as originating and terminating application sequences?

New England Communications

http://www.necomm.com

 

[1a22ip]

JayNEC: Thanks for the reply. Sorry I don't know what this is? Where do I find this setting?

Thanks
ED

1a2 to ip I seen it all

 

[JayNEC]

In System Manager under the users Session Manager communication profile.

New England Communications

http://www.necomm.com

 

[1a22ip]

JayNEC: Yes the CM is set for Both Termination and Origination.

Thanks
ED

1a2 to ip I seen it all