BRI extensions in a hunt group

[kieranmc]

Trying to set up fax server with a 4 port BRI card. I want one DDI (DID) number to serve the fax server, and then hunt the calls around 8 BRI channels. I tried setting up a hunt group in LD 18 with the DFDNs, but it won't take these BRI extensions. Is there a different way of setting up a hunt group with ISDN2 lines, or is it even possible? Any alternatives if not?

Thanks All

 

[johnpoole]

haven't tried that one.. can you point the ddi's to phantom stations and hunt those to the bri's.. post one of the bri's// i would have though ght should have worked

john poole
bellsouth business
columbia,sc

 

[Khosher]

Maybe try use PLDN ?

 

[kieranmc]

I've printed LD27, and the error in LD18 trying to assign the BRI extension to a GHT.

I can only use a PLDN once the GHT is set up

TYPE dsl
DSL 4 0
DATE
PAGE
DES
NACT

TN 4 0 0 0
DES ISDN2
CUST 0
CTYP SILC
OPT BRIL
MISP 3
MODE NTAS
B1CT VCE DTA
B2CT VCE DTA
LDN 0
XLST 0
MTEI 8
MCAL 16
MTSP 8
LAPD 1
PRID 2
PDCA 1
FDN
EFD
HUNT
EHT
TGAR 0
NCOS 0
SCPW
SGRP 0
CAC_MFC 0
CLS UNR ICDD CDMD MRD UDI ABDD PGND BRTD
DATE 3 APR 1998

REQ prt
TYPE tsp
DSL 4 0
OPT

USID 0
MPHC NO
SUPL_SVC AO6
DN 27998 0
CT VCE DTA
MCAL 2
CLIP YES
PRES YES
COLP NO
TRANS NO
FEAT HTD FND SFD CFTD MWD FBD HBTD CFXD DNO3 DNDY
SSRV_ETSI

DN 27997 0
CT VCE DTA
MCAL 2
CLIP YES
PRES YES
COLP NO
TRANS NO
FEAT HTD FND SFD CFTD MWD FBD HBTD CFXD DNO3 DNDY
SSRV_ETSI

DFDN 27998

chg
TYPE ght
LSNO 0081
SIZE
WRT (ADDS: MEM: 0 DISK: 0.0 )
STOR 0 27998

SCH8820
>!
>err sch8820

SCH8820
The DN entered is not valid for the GHT list.

 

[johnpoole]

might try changing cls to hta.. that should you a hunt prompt on the set..

john poole
bellsouth business
columbia,sc

 

[johnpoole]

another thing that i usually do for a short hunt is to allow fna and set the fdn to the next ext in the hunt group. that lets the call forward in case one unit does not answer..

john poole
bellsouth business
columbia,sc

 

[kieranmc]

Telco confirmed that it isn't possible to add BRI extensions to Hunt Group as such, but I have set FDN and HUNT to the next extension in line as John suggested and that seems to do the trick.

Many thanks John and merry christmas one and all!