Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BRI config for multiple dest. ?

Status
Not open for further replies.
Scorpizz

Scorpizz

IS-IT--Management
Oct 28, 2004
7
DK
Hi

I have a 1812 router that is using the BRI interface as a backup line in case of the primary line is down.
No problem.
It calls a local HUB to connect but in case that the HUB is busy due to other call's, I want the 1812 to move on to the next available defined HUB instead of keep calling the same HUB until it's free.
But how to set this up? All the options I see is to make pools with multiple interfaces to one number (dest).
There is the "dialer order sequence" command which are default. But how to re-organise the "Dialer maps" ? It seems that they are sorted by the IP-address and not by the sequence that they are entered....!?!?!?
Does anyone have a good suggestion / idea ?

Thanks in advance,-
 
Status
Not open for further replies.

Similar threads

jarod_paris
  • Locked
  • Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
459
jarod_paris
jarod_paris
B
  • Locked
  • Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
244
badwolf1686
B
stanlyn
  • Locked
  • Question
HowTo Install Multiple PAP2T ATA Devices on Same Lan
Replies
3
Views
519
iggsterman
iggsterman
WinstonCH
  • Locked
  • Helpful tip
What is wrong with the diagram, there are people who will help to fix it? How do i do the configurat 1
Replies
1
Views
710
BIS
BIS
disk-us
  • Locked
  • Question
RTU licensing for a901
Replies
0
Views
214
disk-us
disk-us

Part and Inventory Search

Sponsor

Back
Top