intelwizrd
IS-IT--Management
Ok, so I am about to rip the router out of the rack and tear it apart because I can't for the life of me remember how much memory I have in my cisco 7206vxr. I have documentation telling me multiple ammounts and nothing matches up. And to top it off I can't remember how to interpret the following numbers (long day).
this is the output from a show ver:
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(15)T, RELEASE SOFTWARE (fc1)
TAC Support: Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Mon 10-Mar-03 20:07 by ccai
Image text-base: 0x60008954, data-base: 0x61BE6000
ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105], DEVELOPMENT S
OFTWARE
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(10)S, EARLY DEPLOYMENT RELEA
SE SOFTWARE (fc1)
cisco7206 uptime is 20 weeks, 1 day, 23 hours, 56 minutes
System returned to ROM by reload
System image file is "slot1:c7200-is-mz.122-15.t.bin"
cisco 7206VXR (NPE300) processor (revision D) with 122880K/40960K bytes of memory.
Processor board ID 20400143
R7000 CPU at 262Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache
6 slot VXR midplane, Version 2.0
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
3 FastEthernet/IEEE 802.3 interface(s)
9 Serial network interface(s)
8 Channelized T1/PRI port(s)
125K bytes of non-volatile configuration memory.
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
I ran into a problem when I had the ISP turn on full routes for BGP and it ate up all of the memory. How much is in this thing? I need to know what I need to order to increase the memory. Thanks for your help.
----------------------------
Josh
CCNA, MCSE 2003(in progress)
this is the output from a show ver:
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(15)T, RELEASE SOFTWARE (fc1)
TAC Support: Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Mon 10-Mar-03 20:07 by ccai
Image text-base: 0x60008954, data-base: 0x61BE6000
ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105], DEVELOPMENT S
OFTWARE
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(10)S, EARLY DEPLOYMENT RELEA
SE SOFTWARE (fc1)
cisco7206 uptime is 20 weeks, 1 day, 23 hours, 56 minutes
System returned to ROM by reload
System image file is "slot1:c7200-is-mz.122-15.t.bin"
cisco 7206VXR (NPE300) processor (revision D) with 122880K/40960K bytes of memory.
Processor board ID 20400143
R7000 CPU at 262Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache
6 slot VXR midplane, Version 2.0
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
3 FastEthernet/IEEE 802.3 interface(s)
9 Serial network interface(s)
8 Channelized T1/PRI port(s)
125K bytes of non-volatile configuration memory.
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
I ran into a problem when I had the ISP turn on full routes for BGP and it ate up all of the memory. How much is in this thing? I need to know what I need to order to increase the memory. Thanks for your help.
----------------------------
Josh
CCNA, MCSE 2003(in progress)