Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Braille display for OPI 1
- Thread starter mgrada
- Start date
Hi,
If you take a look to an old Alex-Dokumentation (BC8.1), you will find following information
OPI-1 is used for connecting a braille display, KDN 902 01
For OPI-II you will find only infos about KDN 902 04.
This do not answer your question about KDN 902 02.
I think, but I`m not shure, that KDN 902 02 will also work with OPI-1.
You can only connect this to an old OPI-1 and test it, if it works or not.
best regards,
Norbert
If you take a look to an old Alex-Dokumentation (BC8.1), you will find following information
OPI-1 is used for connecting a braille display, KDN 902 01
For OPI-II you will find only infos about KDN 902 04.
This do not answer your question about KDN 902 02.
I think, but I`m not shure, that KDN 902 02 will also work with OPI-1.
You can only connect this to an old OPI-1 and test it, if it works or not.
best regards,
Norbert
- Status
Similar threads
- Locked
- Question