Boroadcast-Voice announcement on M3904/M3902 or Paging

[lliesbthighs]

Hi, it is release 4.5,11c. I need to set a paging/voice call to bunch of extensions having digital sets through speaker like we use to have in Norstar.
I was reading some old post by using CLS EHTA and
Key x D 4 XX XX V

But when i setup this i get a ring on all ext (having key x d 4 xx xx V)but the announcement/paging works only on one Set, i cant hear voice (through speakers) on other sets.
Can somebody help or post a work around for this setup.I need that atleast 10 extensions should ring at a time and then gets Handsfree so that caller could announce.

It is a very useful feature and i dont understand why nortel havent have this option in there other system beside Norstar.
I know it is denied by Nortel in 11c`s or meridian system but if could somebody has done that and like to help....

 

[GHTROUT]

Move the prime DN and all other keys up one, then add a new non-DID number to KEY 00 of each phone.

Add CLA AAA to the 10 sets.

Build a Group Call list of those 10 non-DID KEY 0 DNs

Add a GRC key to the sets that must page

Press the GRC key, it rings all 10 sets, they all Auto-Answer and you speak through them.

How's that for a work-around


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[lliesbthighs]

It is only with 3rd one shelf, the other 2 are working OK.DTR problem should also effect other 2 shelves if thats the case

 

[lliesbthighs]

Sorry it was the reply for other post.

The actual question was...
Do i have to setup it on KEY 0 (Non DID) or can i use it on other key also??

 

[GHTROUT]

Auto-Answer only applies to KEY 00. You need the set to anto-answer so the voice can come over the phone speaker.

You want a non-DID/unlisted number on 00 and the people's listed/regular number on key 01 or above... Otherwise, all normal calls to the people will auto-answer too.




~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]