Quick question...
I have a few 2620's, and an extra WIC-1T, so that I could have two WIC-1T's in each of two of my 2620's...could I bond the two serial links tohether in a ppp multilink configuration to get 3.072MBps throughput? The reason I ask is because one of them is a 2620XM with advanced enterprise IOS on it, and I want to use it as my adsl router---I would use a dsl modem and bridge it to the 2620, and link the 2620 to another 2620 via the two serial ports. The 2620XM's fastethernet port would be connected to the dsl modem, which is why I would need another router connected to it, to which I connect a 2924 switch for the rest of my network. I realize that I could get a WIC-1ADSL for the 2620XM and eliminate all of this, but I already have all this equipment, and I only get 2.5MB down from my ISP anyway. Just thought I'd ask before I fry something...I know this can be done with T1's, but what about RS232 V.35 interfaces?
Burt
I have a few 2620's, and an extra WIC-1T, so that I could have two WIC-1T's in each of two of my 2620's...could I bond the two serial links tohether in a ppp multilink configuration to get 3.072MBps throughput? The reason I ask is because one of them is a 2620XM with advanced enterprise IOS on it, and I want to use it as my adsl router---I would use a dsl modem and bridge it to the 2620, and link the 2620 to another 2620 via the two serial ports. The 2620XM's fastethernet port would be connected to the dsl modem, which is why I would need another router connected to it, to which I connect a 2924 switch for the rest of my network. I realize that I could get a WIC-1ADSL for the 2620XM and eliminate all of this, but I already have all this equipment, and I only get 2.5MB down from my ISP anyway. Just thought I'd ask before I fry something...I know this can be done with T1's, but what about RS232 V.35 interfaces?
Burt