Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

blue screen .............page_fault_in_nonpage_area

Status
Not open for further replies.

nubenow

MIS
Joined
Sep 20, 2005
Messages
1
Location
US
I have xp pro insytalled on a panasonic toughbook cf-72..................it now keeps shutting down after it has loaded with the dreaded blue screen message

page_fault_in_nonpage_area
vdtm16.sys

I have tried a re-boot from cd, saving all the data and it has worked ok ..................re-registered with microsoft.............fired up, could see that all my data was still there..................then it shuts down again with the same method!!

Can anyone offer some help!
 
Try Safe Mode and see if that works?

Is vdtm16.sys a file you are aware of, the reason I ask is that there are no hits on Google for that file?




Pick over this following proforma and see if anything there can help you? Just ignore what may not apply to you.

To get further information about the error look in your Event viewer.

Look in the System or Application folder. You can get to the Event Viewer via right click My Computer icon and select Manage.

Any errors logged in the Event Viewer can be expanded by double clicking on the error line.

Take any event error I.D. number and search for it on these sites.


Also check any "Information" line that mentions "savedump" and you should find reference to "recovered from a bug check". This is the Stop Error that caused your problem.

You can also turn off "automatically restart after an error" so it will just halt at the fault and display the full Stop Error and blue screen.

Right-click My Computer, and then click Properties .
On the Advanced tab, click Settings under Startup and Recovery .
Click to clear the Automatically restart check box under System failure , and then click OK . The error message on a blue screen should remain on the screen so you can record the error information.



If the error occurred after installing a device driver or application, try using Safe Mode and removing the driver or program.

To check your RAM.


To check your Hard Drive.

The drive manufacturer will have free diagnostic software to check your drive for problems.

You can also load the Recovery Console and run ChkDsk /r to check for problems.

HOW TO: Install and Use the Recovery Console for Windows XP (Q307654)

****You can disable vdtm16.sys from within Recovery Console if it is a driver or service.****

To check your drivers.

HOW TO: Verify Unsigned Device Drivers in Windows XP


To check conflicting software.

310353 - How to Perform a Clean Boot in Windows XP

316434 - HOW TO: Perform Advanced Clean-Boot Troubleshooting in Windows XP

310560 - How to Troubleshoot By Using the Msconfig Utility in Windows XP




Removing adware & spyware
faq608-4650

Will check your computer for spyware and adware.



To checkout unnecessary services you are running.

See if you have any services that are flagging as "Starting" but not actually running.


Some general things to try.

See if System Restore will get you back to a restore point before your problem with Windows.

Try Safe Mode (Do you have this problem in Safe Mode?).

Try running ChkDsk to check your drive for errors. Right click your Drive icon/ Properties/ Tools/ Error Checking.

Run the System File Checker program from the Run Box by typing.....Sfc /Scannow in it and have your XP CD handy.

If they don't work you could try repairing windows itself by running it over itself. You will lose all your windows updates but your files will be untouched.

How to Perform an In-Place Upgrade (Reinstallation) of Windows XP (Q315341)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top