Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Blank Black Screen

Status
Not open for further replies.

ReLiVaNt

Technical User
Aug 31, 2003
44
US
Hello All!
I am getting a blank black screen on start up of my computer. I power the computer on and there r no beeps and then a blank black screen.

Compaq FS740
Pentium 4
Windows XP

The last operation on the computer was saving a typed document to a jump drive. Powered down computer. Returned to power up and nothing.

Thanks In Advance!
 
Is there any Bios screen loading or are you seeing or hearing any activity at all? If the computer is dead then there is not a lot of help we can offer, so the question is, are there any signs of life?

If not then it may be a case for the hardware forum or the repair shop.

PC hardware - General discussion

PC hardware - Hard drive issues
 
Yes I do get the bios screen loading but no beeps
 
If you still have the USB jump drive in, remove it a all un need USB devices, unplug the power for 30 sec. plug it back in a try to boot. Some computers will try to boot from a jump drive if pluged in at boot and the bios is set to boot form USB or removeable drives.
 
314503 - Computer Stops Responding with a Black Screen When You Start Windows

Q305595 - HOW TO: Create a Boot Disk for an NTFS or FAT Partition in Windows XP

HOW TO: Install and Use the Recovery Console for Windows XP (Q307654)

Try Chkdsk /r from the Recovery Console.

Further advice can be found here.

XP will not boot
thread779-849914
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top