Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bladecenter ESM Trunking

Status
Not open for further replies.
chieftan999

chieftan999

MIS
Mar 1, 2004
204
GB
I have a very quick question that I thought I had the answer to but dont:-

I thought to view if Trunking was on then the Port for the ESM would show as BLUE on the Web interface, but in fact have now found out that from the ESM perspective this shows aggregation as being active on that port.

How can I tell if Trunking is working????


 
Status
Not open for further replies.

Similar threads

zinkann
  • Locked
  • Question
Bladecenter
Replies
0
Views
95
zinkann
zinkann
rongill
  • Locked
  • Question
IBM Bladecenter issue .. blade shut off
Replies
1
Views
125
victorv
victorv
Kronick
  • Locked
  • Question
Does someone found a esm firmware which lower the sound of PE2650 ? 1
Replies
14
Views
309
Balevian
Balevian
jrapp
  • Locked
  • Question
BladeCenter MMU Reset
Replies
3
Views
142
mrn
mrn
mytelecoms
  • Locked
  • Question
IBM BladeCenter Power Problems
Replies
5
Views
157
Mammoth
Mammoth

Part and Inventory Search

Sponsor

Back
Top