phonedudeSr
IS-IT--Management
Is there a way to terminate a 25 pair amphenol cable to a BIX block without punching down the 25pair. I have used 110 where we can plug the cable directly into the 110 then crossconnect to the riser?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bix Termination
- Thread starter phonedudeSr
- Start date
- Status
yes, this is possible...
this link is for a .pdf that includes many of Belden's BIX parts:
The 2 options listed here that fit your application are:
Universal BIX-PAC
Universal BIX-PAC, 10-8, 8 RJ21X Female to 8 QCBIX1A Connectors A0321775
Universal BIX-PAC, 10-10, 10 RJ21X Female to 10 QCBIX1A Connectors A0321776
There may be single adaptors, instead of the frame types listed above, but do not know.
ccmjgb
- Psalm 144:3
this link is for a .pdf that includes many of Belden's BIX parts:
The 2 options listed here that fit your application are:
Universal BIX-PAC
Universal BIX-PAC, 10-8, 8 RJ21X Female to 8 QCBIX1A Connectors A0321775
Universal BIX-PAC, 10-10, 10 RJ21X Female to 10 QCBIX1A Connectors A0321776
There may be single adaptors, instead of the frame types listed above, but do not know.
ccmjgb
- Psalm 144:3
- Thread starter
- #3
phonedudeSr
IS-IT--Management
Thanks, is there a way to plug the Amphenol 25 pair from the VG224/350 to the Bix frame?
- Status