Nothing is happening. I get no error and not prompt and nothing has installed. I have used the full setup.exe that prompts to install remote for windows on the server (I am using the cd on the server itself to do this). Nothing happens. It was also suggested to me to try doing the "silent" install (\AC\NWRANT32\RANT32\setupaa.cmd) and this didn't do anything, either. I can't seem to find any information related to this on the knowledgebase. The only thing it does sometimes is appears that the server I am installing to will act as the backup server for other Windows servers connected on the network. HELP!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BE9.1 1127 for Netware - trying to install remote on Windows server
- Thread starter Cleo02
- Start date
LawnBoy
MIS
- Mar 12, 2003
- 2,881
I have this working. You should push the remote agent to Windows from the Netware BE console (either locally or on the server). You shouldn't try to load it from CD, that causes lots of config issues that are avoided by pushing the install. Chapter 2 page 11 of the BE 9 for NW manual.
Make sure you have a license that is for "BE 9.1 for Netware Servers Remote Agent for Windows Servers".
Make sure you have a license that is for "BE 9.1 for Netware Servers Remote Agent for Windows Servers".
- Status
Similar threads
- Locked
- Question
- Locked
- Question