Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BE Version 10 - Throughput rate

Status
Not open for further replies.

Ikletinks

Technical User
Joined
Mar 21, 2005
Messages
3
Location
GB
Can anyone help - I have BE version 10 running on a Win 2003 server and am unable to get throughput any higher than 30mb/min (which is a big problem in a 12 hour time window when you are trying to backup 200gb of data!). I have spent hours messing around with the NIC's - had them teamed, bridged, single NIC, 100/full, 100/half, auto, changed the switch port to match the NIC. At the moment I have only 1 NIC plugged into the network running 100/full, as is the switch port. Don't think there are any settings within BE that I can change but am open to suggestions. Have 4 other Backup servers on the network, all happily running V9.1 and achieving respectable throughput of around 300mb/min......should I downgrade? Anyone else had these issues?
 
IBM Netfinity 335 server, HP Storage works SSL1016 tape autoloader, SSDLT tapes
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top