Ibrahim Abbas
Technical User
thread1361-1146656
how can i connect to BCM50 using my laptop, to make some changes in the voice mail tree
how can i connect to BCM50 using my laptop, to make some changes in the voice mail tree
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM50
- Thread starter Ibrahim Abbas
- Start date
- Status
Firebird Scrambler
Systems Engineer
You need to find the IP address or use the OAM port that is usually
10.10.11.1 with a subnet of 255.255.255.252. Make your computer 10.10.11.2.
You need to know the password. There are pleanty of information in the FAQ section.
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
10.10.11.1 with a subnet of 255.255.255.252. Make your computer 10.10.11.2.
You need to know the password. There are pleanty of information in the FAQ section.
Firebird Scrambler
Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer
Website = linkedin
curlycord
Programmer
You provided an old link for "remote" access but you did not specify it in your question if you want remote access or onsite access.
Since Firebird explained onsite access here is for remote:
Method 1- Internet:
-Acquire your public IP
-If you are not remoting to your PC where BEM is installed then:
On the Router forward port TCP 5989 to the LAN IP of the BCM
-Connect using BEM on your PC/Laptop to the Public IP address
Method 2 - Phone line:
-From site enable "modem dial-in" by checking the box via Resources/DialupInterfaces
-Note the Modem number further down the on the same section
-If you do not have a dedicated phone number on the BCM then make sure to have AA answer the line.
-On your PC/Laptop use Dial Up Networking "Connect to a Workplace" to connect to your phone number
-Use a dial string that first your setup using commas for a pause to give AA a chance to answer
Example: "905-XXXXXXXXX,,,,YYY (YYY = your modem DN)
-Your IP for the Dialup Connection should be 10.10.42.2
Once connected use your web browser to make the changes by using the BCM's LAN IP.
________________________________________
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
Since Firebird explained onsite access here is for remote:
Method 1- Internet:
-Acquire your public IP
-If you are not remoting to your PC where BEM is installed then:
On the Router forward port TCP 5989 to the LAN IP of the BCM
-Connect using BEM on your PC/Laptop to the Public IP address
Method 2 - Phone line:
-From site enable "modem dial-in" by checking the box via Resources/DialupInterfaces
-Note the Modem number further down the on the same section
-If you do not have a dedicated phone number on the BCM then make sure to have AA answer the line.
-On your PC/Laptop use Dial Up Networking "Connect to a Workplace" to connect to your phone number
-Use a dial string that first your setup using commas for a pause to give AA a chance to answer
Example: "905-XXXXXXXXX,,,,YYY (YYY = your modem DN)
-Your IP for the Dialup Connection should be 10.10.42.2
Once connected use your web browser to make the changes by using the BCM's LAN IP.
________________________________________
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
- Status
Similar threads
- Locked
- Question
- Locked
- Question