TnPhoneguy
Vendor
I have a bcm 50 rel 3. We had a power outage and when the system came back up I have alarm codes of 10002,10009,10010 I have rebooted the system several times. Do I need to restore a backup copy?
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM50 VM alarm codes
- Thread starter TnPhoneguy
- Start date
- Status
Firebird Scrambler
Systems Engineer
Error 10010 is interesting?
The following actions should only be conducted by a Nortel
Networks' personnel. (1) reboot, (2) if problem persists,
through VNC run miserver shutdown, and mspTrace -mutils -
d0xffffffff, (3) try again, collect the trace files in …\Unified
Manager\log, and forward them to developers
I'd run a full backup first, before carrying out a reboot.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
The following actions should only be conducted by a Nortel
Networks' personnel. (1) reboot, (2) if problem persists,
through VNC run miserver shutdown, and mspTrace -mutils -
d0xffffffff, (3) try again, collect the trace files in …\Unified
Manager\log, and forward them to developers
I'd run a full backup first, before carrying out a reboot.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads
- Locked
- Question
- Locked
- Question