Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM50 programing manual
- Thread starter dmdm5027
- Start date
where xx.xx.xx.xx is the BCM IP address. Which version of BCM? I maybe can post the operational and user installs.
- Thread starter
- #3
i have a BCM50 release 2 task guide on my site if you want it
download it and install it on your pc/laptop....
download it and install it on your pc/laptop....
- Thread starter
- #5
OBrienComms
Vendor
the default user name is nnadmin and password is PlsChgMe!(well known so not gviving any secrets away and you should always change it for security anyway)
if the password has been changed you will have to reset the system to get it back to default then reprogram.Or get it from your maintainer or try doing a search on google.
if the password has been changed you will have to reset the system to get it back to default then reprogram.Or get it from your maintainer or try doing a search on google.
- Status
Similar threads
- Locked
- Question
- Locked
- Question