BCM50 Line Module issue 1

[curlycord]

In Telephony Resources I show:

Location_____________BUS____STATE______Low____HIGH
Exp 2 8X16 Combo
Exp 2.1 CTM4/GATM4 7 Enabled 95 98
Exp 2.2 CTM4/GATM4 7 Enabling 103 106

1st question is why would it be enabling non stop.
Maybe because of next question...

PORT____LINE_____STATE
0701 94 equipped
0702 95 equipped
0703 96 equipped
0704 97 equipped

In Trunk Port Details:
PORT____LINE_____STATE
0705 Unequipped
0706 97 Unequipped
0707 Unequipped
0708 Unequipped

Why/how is line 097 on both??

Currently there is no physical lines attached to M0D 2.2 but should they order more there looks to be a problem?

Thanks





=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[snowman50]

Put 1 line onto the second 2.2 line 103 and the card should show enabled after you refresh the screen..test and see if you get dial tone.

cards dont show enabled until something is connected to it

 

[curlycord]

Maybe will try next time out, hopefully it will clear that 97 on 2.2 also.

Thanks


=----(((((((((()----=
curlycord

http://www.curlycord.com