Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM50 auth code for expansion 1

Status
Not open for further replies.

pmcilnay

Programmer
Sep 20, 2006
104
US
I have a new BCM50 I have an auth. code for 2 analog trunks, internal and an auth. code for the expansion cabinet. Am I correct that regardless of the MBM in the expansion cabinet, it should work. It happens to be a GATM4, but the lines show as unequipped. The card is enabled.
 
No trunks connected, dip switches are factory. Will the trunks make a difference? The two internal trunks show idle with out having anything connected.
 
I believe so. Connect a CO trunk to it and the port should show active.
 
All lights are solid green, i'm in the correct port. I think Dasheen is right on. Thanks!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top