Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM400 log

Status
Not open for further replies.

alanleyva

MIS
Joined
Aug 9, 2011
Messages
4
Location
US
Hello I have a BCM400 4.0.2.03, I was reviewing the logs and I found this:

Core Telephony - "Errored Second"short term alarm threshold has been exceeded on the DTM. The module is in a no-new-calls state.

Core Telephony - "Degraded Minute"short term alarm threshold has been exceeded on the DTM. The module is in a no-new-calls state.

Core Telephony - "Errored Second"short term alarm threshold has been exceeded on the DTM. The module is in a no-new-calls state.

Core Telephony - "Degraded Minute"short term alarm threshold has been exceeded on the DTM. The module is in a no-new-calls state.

Core Telephony - Digital trunking clock in free run.

Core Telephony - "Severely Errored Second"short term alarm threshold has been exceeded on the DTM. The module is in a no-new-calls state.

Core Telephony - "Errored Second"short term alarm threshold has been exceeded on the DTM. The module is in a no-new-calls state.

Core Telephony - "Loss of Frame" short term alarm threshold has been exceeded on the DTM. The module is in a no-new-calls state.

Core Telephony - "Errored Second"short term alarm threshold has been exceeded on the DTM. The module is in a no-new-calls state.

Core Telephony - "Degraded Minute"short term alarm threshold has been exceeded on the DTM. The module is in a no-new-calls state.

It happens every 2 or 3 days, any thought ?

Thank you
 
Your T1 or PRI is acting up. Check with your provider. What time of day do these alarms occur? Are the users unable to place a call?

 
Thanks for reply jsaad they occur during the day, I haven't notice this impact my incoming or outgoing calls, but the reason why I checked the logs is because a voice degradation I have been experiencing during the day. A technician from ATT told me to do a simple test between two phones: say numbers like " 1 2 3 4 ...." the result was that the other person who is hearing is missing some numbers in the counting, any suggestion ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top