BCM ANALOG STATION INTERFACE

[eartel]

I HAVE INSTALLED A ASM FOR A BSM AND ASSINGED THE SWITCH SETTINGS FOR THE MODULE TO RESIDE AS MODULE 3. I GET BATTERY BUT NO DIAL TONE. I HAVE CONFIGURED FOR MODULE 5 AND GET THE SAME. I HAVE CHANGED THE MODULE FOR ASM IN THE CONFIG. IS THERE ANY OHTHER SETTING I NEED TO KNOW ABOUT?

EARTEL
888 416 4327
310 549 0387 Fax
rluna@eartel.net

 

[Rapetou]

Check to setup your module on Media Bay Module option in the BCM to ASM Station Module manualy.

Setup primary line to I/C for your extension...

Good luck!!!

 

[curlycord]

Try going into Set Capabilties and adding F78 under Hotline External.