BCM 50 with FEM

[newkid2007]

Has any one try to use a Fiber Expansion Module on a BCM 50?
Nortel has told me the FEM is only for the 200/400.

 

[CTCINY]

Never tried it but I don't see how it could work with the 50. Each Module installed takes a whole bus on the 200/400 so you wouldn't be able to use most of the mod. But if Nortel says no then I guess it doesn't

 

[cook1082]

And you would need to use the dip switches to tell it what mods it uses and the 50 sees the exp you enabled.No switches used.