Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 50 telset call restriction configuration
- Thread starter kangodan
- Start date
Yes, the programming matrix looks just the same as the MICS programming.
The difference is the BCM50 asks you for your telset programming password when you set up your user accounts. So when you access the config menu on the phone it asks for the numerical user and password setup that you built.
Jim
"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein
NCSS NCTS NCTE
Mitel 3300 4.2 basic & advanced, 5000 4.0
The difference is the BCM50 asks you for your telset programming password when you set up your user accounts. So when you access the config menu on the phone it asks for the numerical user and password setup that you built.
Jim
"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein
NCSS NCTS NCTE
Mitel 3300 4.2 basic & advanced, 5000 4.0
- Status
Similar threads
- Locked
- Question
