Oct 16, 2007 #1 kungfumstr Vendor Joined Sep 29, 2007 Messages 113 Location US anyone run into issues with the internal digital set ports "locked" verified active keycodes- disable and reenabled port
anyone run into issues with the internal digital set ports "locked" verified active keycodes- disable and reenabled port
Oct 17, 2007 #2 senk1s Vendor Joined Dec 15, 2003 Messages 3,606 Location CA nope is it showing on the device screen(when trying to make a call) or element manager (while programming)? Upvote 0 Downvote
nope is it showing on the device screen(when trying to make a call) or element manager (while programming)?
Oct 24, 2007 #3 AC2 Programmer Joined Oct 3, 2001 Messages 27 Location US Remove all lines off the Set and use the DRT to Prime for 2 Rings. This will show the CLID on the CS1K. Upvote 0 Downvote
Remove all lines off the Set and use the DRT to Prime for 2 Rings. This will show the CLID on the CS1K.
Oct 24, 2007 Thread starter #4 kungfumstr Vendor Joined Sep 29, 2007 Messages 113 Location US thanks all but i resolved the issue by -disabling the internal ports -reentering the keycode file -rbooted the system Upvote 0 Downvote
thanks all but i resolved the issue by -disabling the internal ports -reentering the keycode file -rbooted the system