Bcm 50 ext lock

[UKGLEN]

Hi there

I have a bcm 50 which needs to have a ext locket (barred) can you put a password in to make calls is this possible and then lock it again after calls ??

regards
Glen Hale

 

[SupportDude]

Yes.
You can restrict the phone from making any calls and then use a COS password to override the restriction when necessary.

-SD-

http://www.mysupportguy.net

 

[UKGLEN]

Can you advise how to set it up through element manager please

regards
Glen Hale

 

[snowman50]

go to telephony-sets - active sets
go to Restriction tab
select extn and set Normal filter(02) to 06 which barrs all calls

go to call security Class of service
select an entry
put in a 6 digit password and set a restriction filter to allow calls say 02

now the users dials feature 69 (i think) enter the 6 digit code followed by 9 for outside line

 

[UKGLEN]

Hi

Thanks for that its know barring calls but every time I do feature 69 it says admin access prohibited ??

In class of services I have entered a password under 00 but do I need to enter anything in the other Collins under filters ??

Thanks for the help

regards
Glen Hale

 

[telcodog]

It's F68

 

[UKGLEN]

Feature 68 code then no ??

regards
Glen Hale

 

[snowman50]

I was close
Don't know what I was thinking when I said 69

 

[UKGLEN]

That's ok m just trying to get this to work know

regards
Glen Hale

 

[UKGLEN]

What do I put in the filters under class of service. O2 ?

regards
Glen Hale

 

[cook1082]

Make filter 06 and And put 9,1, I think you can do a wild card of any number. Then assign 6 to the phone. Filter 2 is the default that is assigned to every phone and if you change it it will retrict all phones.

 

[snowman50]

Yes use 02

This will allow all calls

 

[UKGLEN]

Hi there

Do I have put all lines into 06 which I confirm
It bares called great now in cos of services
00 I have put a password of 123456 do I have to put anything in
Set restriction filter or line restriction filter

When I try f68 then password then I sail 9 then a no. ??

regards
Glen Hale

 

[UKGLEN]

That should say dial dam I phones :-(

regards
Glen Hale

 

[Wallysworld]

I'm not exactly sure what your trying to say there, but if you've followed snowman's steps from earlier and you've set-up your cos.
if you pick up the phone and try to dial an outside # it should beep at you and tell you it's a restricted call.
when you press Feature 68 and enter your password, it should allow you to dial any outside # you have allowed in your filter.

"snowman50 (TechnicalUser)
23 Feb 13 13:22

go to telephony-sets - active sets
go to Restriction tab
select extn and set Normal filter(02) to 06 which barrs all calls

go to call security Class of service
select an entry
put in a 6 digit password and set a restriction filter to allow calls say 02

now the users dials feature 68 enter the 6 digit code followed by 9 for outside line"

This will do it.

 

[UKGLEN]

hi there

just to update you on this subject i have put all the phones into class no. 06 which bars all phones

in the class of service 06 table i have set a password 123456 then put 02 in the first filter

is this right so far

then does the customer feature 68 then password then 9 dial a telephone no



regards
Glen Hale

 

[snowman50]

Yes

Read the previous post above