OhioTelecom
Vendor
Customer currently has a BCM 200 with a PRI and DSM16. They would like to add more Ext. Would I be able to use the DSM32 or do I need a DSM 32+?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 200 upgrading
- Thread starter OhioTelecom
- Start date
- Status
acewarlock
Technical User
You can use either one. just make sure of the DIP settings as a 32 uses 2 BUS and a 32+ uses 1 BUS.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
