bcb and winword

[drfb]

Dear All,
I would like to create a winword page with some information included in a database. Searching on the web I find only few commands:
V = CreateOleObject("Word.Basic");
V.Exec(Procedure("AppShow"));
V.Exec(Procedure("FileNew") << "Normal");
V.Exec(Procedure("FontSize") << 24);
V.Exec(Procedure("FileSaveAs")<<Table1Nome->Value);
V.Exec(Procedure("AppClose"));


could somene help me ?

ciao,
francesco

 

[2ffat]

I've not used Winword so I may have to do some looking around.



James P. Cottingham
-----------------------------------------
^{I'm number 1,229!
I'm number 1,229!}

 

[jmmmx]

I'm using this for fill a doc (and save or print):


void __fastcall TfClientes::bCbvClick(TObject *Sender)
{
String sFic = xAp.cPB + "\\CARTBV_" + DigitLg(lsLg->Text) + ".doc";

if (MiraFile(sFic)) {
AvisaW(this, "Generando e impriendo carta ...");
CreaDOC(sFic, 1);
AvisaW(this, "");
} else
SBox("No se encuentra plantilla: " + sFic);

}
//---------------------------------------------------------------------------

void __fastcall TfClientes::CreaDOC(String cF, int nM)
{
Variant vWord, vDocumentos, vDocumento, vSeleccion, vBuscar;

//--- Abre Word
vWord = CreateOleObject("Word.Application");

//--- Abre el documento que usaremos como plantilla
vDocumentos = vWord.OlePropertyGet("Documents" );
// Documento // Confirmar conversiones
vDocumento = vDocumentos.OleFunction("Open", cF.c_str(), false, true, false, "" );
// Modo de solo lectura, // Añadir a ficheros recientes // Clave del documento
cF = IntToStr(xCF.nFd) + ".doc";
// al final. - vWord.OlePropertySet("Visible", true);

//--- Selecciona todo el documento para reemplazar
vSeleccion = vWord.OlePropertyGet("Selection");
//--- esto inserta texto- en word: Insertar/Marcador...
//vSeleccion.OleProcedure("Goto", -1, VT_EMPTY, VT_EMPTY, "nomape");
//vSeleccion.OleProcedure("TypeText", Une2Cd(xCF.cN, xCF.cA).c_str());
//vSeleccion.OleProcedure("Goto", -1, VT_EMPTY, VT_EMPTY, "direc");
//vSeleccion.OleProcedure("TypeText", xCF.c3.c_str());
//vSeleccion.OleProcedure("Goto", -1, VT_EMPTY, VT_EMPTY, "cppobl");
//vSeleccion.OleProcedure("TypeText", Une2Cd(xCF.c4, xCF.c5).c_str());
//vSeleccion.OleProcedure("Goto", -1, VT_EMPTY, VT_EMPTY, "prov");
//vSeleccion.OleProcedure("TypeText", xCF.c6.c_str());
//vSeleccion.OleProcedure("Goto", -1, VT_EMPTY, VT_EMPTY, "pais");
//vSeleccion.OleProcedure("TypeText", xCF.c7.c_str());
//-------------------------------------------------
vSeleccion.OlePropertyGet("Range").OleProcedure("SetRange", 0, 0);
vBuscar = vSeleccion.OlePropertyGet("Find");
vBuscar.OleProcedure("ClearFormatting");
vBuscar.OlePropertyGet("Replacement").OleProcedure("ClearFormatting");
if (nM>0) {
vBuscar.OleProcedure("Execute", "{nmapel}",
VT_EMPTY, VT_EMPTY, VT_EMPTY, VT_EMPTY, VT_EMPTY,
true, VT_EMPTY, VT_EMPTY, Une2Cd(xCF.cN, xCF.cA).c_str(), 2);
vBuscar.OleProcedure("Execute", "{direc}",
VT_EMPTY,VT_EMPTY, VT_EMPTY, VT_EMPTY, VT_EMPTY,
true, VT_EMPTY, VT_EMPTY, xCF.c3.c_str(), 2);
vBuscar.OleProcedure("Execute", "{cppobl}",
VT_EMPTY,VT_EMPTY, VT_EMPTY, VT_EMPTY, VT_EMPTY,
true, VT_EMPTY, VT_EMPTY, Une2Cd(xCF.c4, xCF.c5).c_str(), 2);
vBuscar.OleProcedure("Execute", "{provi}",
VT_EMPTY,VT_EMPTY, VT_EMPTY, VT_EMPTY, VT_EMPTY,
true, VT_EMPTY, VT_EMPTY, xCF.c6.c_str(), 2);
vBuscar.OleProcedure("Execute", "{pais}",
VT_EMPTY,VT_EMPTY, VT_EMPTY, VT_EMPTY, VT_EMPTY,
true, VT_EMPTY, VT_EMPTY, xCF.c7.c_str(), 2);
// ----- ^^^ --- ok para sustituir

//--- salvamos automaticamente si procede y cerramos Word
cF = xAp.cPB + "\\CtBv" + cF;
vDocumentleProcedure( "SaveAs", cF.c_str() );
vDocumentleProcedure("PrintOut");
while (vWord.OlePropertyGet("BackgroundPrintingStatus")>0) {
::Sleep(390);
//Application->ProcessMessages();
}
//vWord.OlePropertySet("Visible", true); //aqui lo vemos para imprimir
}
else { //--- para email
vBuscar.OleProcedure("Execute", "{trat}",
VT_EMPTY, VT_EMPTY, VT_EMPTY, VT_EMPTY, VT_EMPTY,
true, VT_EMPTY, VT_EMPTY, xTr->Text.c_str(), 2);

vBuscar.OleProcedure("Execute", "{nmapel}",
VT_EMPTY, VT_EMPTY, VT_EMPTY, VT_EMPTY, VT_EMPTY,
true, VT_EMPTY, VT_EMPTY, Une2Cd(xCF.cN, xCF.cA).c_str(), 2);

xCl.cCF = xAp.cPB + "\\EInf" + cF; // para enganchar...
vDocumentleProcedure( "SaveAs", xCl.cCF.c_str() );
}

//cerramos todo.
vDocumentleProcedure("Close", 0xFFFFFFFF);
vWord.OleProcedure( "Quit" );

vWord = vDocumentos = vDocumento = vSeleccion = vBuscar = Unassigned;
Application->ProcessMessages();
}
//---------------------------------------------------------------------------

 

[drfb]

thanks for your message.
i should insert a button inside a form and onclick event insert the code line
----------------------------------
String sFic = xAp.cPB + "\\CARTBV_" + DigitLg(lsLg->Text) + ".doc";

if (MiraFile(sFic)) {
AvisaW(this, "Generando e impriendo carta ...");
CreaDOC(sFic, 1);
AvisaW(this, "");
} else
SBox("No se encuentra plantilla: " + sFic);
-------------------------------
I have done it but the compiler shows me the following code error undefined symbol 'xAp'
I must include something in the form?
thanks again
francesco

 

[jmmmx]

Sorry for my late.

All that are string, int,... of my own (i.e. path, number).
Change to you need.