hi,I have done a few installs of IPO,1 large w/ 6 expansions and tcm8,ip sets and digital and also a few small ones,I am a Nortel Bcm,mics and CICS vetran, here is the issue/question,I have received 4 IPO controllers, 3 are where in Basic mode..9.0, 1 in essential mode 7.0..(27)the Essential 7.0 will not except a 9508 phone, the Basics will so I "changed mode" setting to Standard on the basics, and now the phones say UN-LICENSED. Are the sd cards set for basic only and now I need to pay for a standard lic.Also they will NOT go back to basic mode.Help,thanks,Bob
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
basic to standard
- Thread starter flori1
- Start date
intrigrant
Systems Engineer
If you recreate the SD card and have no "config.cfg" file on the SD Card IP Office will start in BASIC mode.
- Status
Similar threads