I'm trying to set up our web server on an NT 4.0 sp6 I know that I only need some of the ports of the "permit all" or "permit only" settings. Does anyone know which ones? we are only going to use our server for information to our clients, and form get through asp pages, we have frontpage extensions installed. We might put secure pages SSL in the future. I don't want to start setting up numbers and find out that a client can't get to our site, or that they can't upload a form or something. Any help would be appreciated. Thank you
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bare minimum Tcp/ip UDP?
- Thread starter click
- Start date
If you are not running through a firewall, then if it tests ok internally then you will be ok externally.
Allow all for the moment and test the site. While you are testing it you can run netstat on the server to list which ports are in use. Run this often enough and you will find the right ports!!!
Allow all for the moment and test the site. While you are testing it you can run netstat on the server to list which ports are in use. Run this often enough and you will find the right ports!!!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question