Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Barcode and FoxPro
- Thread starter sdmi
- Start date
What we used at a previous job was a barcode font for printing. These are easy to use, you just select that font to print instead of say, Courier, when you're designing your report or label layout. You can purchase bar code readers, like the handheld ones in the stores, that connect between the pc and keyboard so that when you pull the trigger, it scans the barcode it stuffs the keyboard with what is printed on the barcode.
Dave S.
Dave S.
ramani :-9
Guest_imported
New member
- Jan 1, 1970
- 0
ramani
I think you can set your bar code scanner to include a CR or
some key-strokes so as to simulate a keyboard input instead
of software programming it. The bar-code software has done
this part, you don't have to worried about it with your
software.
I think you can set your bar code scanner to include a CR or
some key-strokes so as to simulate a keyboard input instead
of software programming it. The bar-code software has done
this part, you don't have to worried about it with your
software.
- Status
Similar threads
