Backups not all starting 1

[jjjon]

I've a small problem with Networker 7.3.2. I have a Group with 4 storage nodes in it. When I kick off the group only one of the nodes starts to backup, even though there are 3 free drives the other 3 could be using.

Any ideas?

Thanks
J

 

[605]

Did you increase the default parallelism for the server (4) at all?

 

[jjjon]

The server that is running is set to 4 - and is running 4 streams. All other 3 are set to 4 as well, but aren't running any.

J

 

[605]

So - it is not surprising. Increae the server to your max - worst case enter 512 ... and the software will remind you about your limitations ;-)

 

[jjjon]

Spot on - thanks 605 - I was only setting it on the Client Resource, not the server itself.

Thanks
J