Backup POTS lines

[Bcpaul]

Hi All,

Can someone tell me how to program 4 copper lines i have as back up to the main T1, when the T goes down for outgoing access? on Option 11C Meredian system

Bcpaul

 

[johnpoole]

do you need the route, the trunks or the routing?

john poole
bellsouth business
columbia,sc

 

[Bcpaul]

i know the routes the T1 and POTS are.
I just need to be able to program that wehn the T1 route fails it has to go to POTS to call out from the system

Bcpaul

 

[johnpoole]

ld or local?
ld 90
prt
0
net
ac1
npa (1213) ld number

or
nxx (434) local number
that will point you to a rlb

ld 86
prt
rlb
then then rlb from above
post
that here and i'll get back to you

john poole
bellsouth business
columbia,sc

 

[Bcpaul]

ok done that,
RLI 0
ENTR 0
LTER NO
ROUR 8
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 0
DMI 1
FCI 0
FSNI 0
SBOC NRR
CBQ NO
ISET 0
NALT 5
MFRL 0

Hope this helps.

Thanks john,

Bcpaul

 

[johnpoole]

on rli 0 do a chg, at the entr prompt you'll need enty 1, then answer the prompts the same way except for route, you'll need the overflow route there. the frl will allow the same ncos users access or you can increase that sothat only select can call out duing a t1 down..

you'll also need to print the dgt, for dmi 1 to decide if it needs to be included in you entry..

john poole
bellsouth business
columbia,sc

 

[Bcpaul]

Is that on Ld 90?

Did not see the entr propmt.

Bcpaul

 

[johnpoole]

ld 86
prt
rlb
x

chg
l
rlb
x
entr ... new entry goes here

john poole
bellsouth business
columbia,sc

 

[Bcpaul]

John,
will this automatically grab the POTS lines even tho the extension hits 9 to grab the outsidline?
The Acess code for the T1 route and Pots are different.
Thank you for everything until now.

Bcpaul

 

[johnpoole]

yes the acod is replaced by ac1 when ou use bars, dial 9+ ld 90 points it to a route list, then ld 86 defines the route and places rest. levels and order.. to test come in after hours and take down the t

john poole
bellsouth business
columbia,sc

 

[Bcpaul]

cool thank you John,

Bcpaul