Azure 1st time

[teletechman]

I am trying to deploy App server R12.1 to Azure and it is my first time. So that means that the docs give no info on what I need most. I want to ignite the instance but am not sure what IP address info to use, I have only done onsite virtual set ups so we usually use an internal address and go from there. I need to know what I ignite it to for IP addressing, does this come from the IT provider or do I leave this DHCP?
Mike

 

[Ekster]

Follow the guide where it goes into setting the IP address for the Server from the console

Chapter 13: Initial Server Configuration -Setting the virtual machine's IP address

Once you have a reachable IP address you should be good to go.

 

[teletechman]

Do you have the link the guide I have does not have the Chapter13 you reference?

 

[Ekster]

Here you go.

 

[teletechman]

This is for local VM servers what about Azure I don't control the IP addresses and was looking to see if I need the IT provider to tell me the routable address or just to keep it at DHCP which gives it a public address that is routable?

 

[Ekster]

This should all be planned out ahead of the installation, I personally, would only use static IP addresses and have the Server Edition sat behind a firewall.

You need to talk to the customer IT provider.