eblackwell
MIS
I created a Avery Label format because 3381 wasn't listed, so I edited one that was similar and saved it.
The size of the post card is 4.25 H x 5.5 W, 4 cards total on the sheet (2 on top, 2 on bottom). The problem is, while the margins show correctly on the screen, the right margin is setting at 2.25; if I try to change it to anything bigger, even 3, it totally screws up, giving me a tiny column of say a quarter of an inch.
Any ideas why this is happening?
Thanks.
The size of the post card is 4.25 H x 5.5 W, 4 cards total on the sheet (2 on top, 2 on bottom). The problem is, while the margins show correctly on the screen, the right margin is setting at 2.25; if I try to change it to anything bigger, even 3, it totally screws up, giving me a tiny column of say a quarter of an inch.
Any ideas why this is happening?
Thanks.