Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Avaya SIP End Point
- Thread starter cfickes
- Start date
The phone registers to Session Manager. Session manager runs that phone's actions through CM/the PBX.
A SIP trunk would be easier, but you could just build a SIP phone with something like 24 line keys and do similar stuff. A trunk would be better for reporting and/or recording.
A SIP trunk would be easier, but you could just build a SIP phone with something like 24 line keys and do similar stuff. A trunk would be better for reporting and/or recording.
- Thread starter
- #3
I just want a SIP configuration but not a SIP trunk group, if that is possible. If I put a SIP trunk in for connecting the IVR to the PBX it will break the CT-Connect feature functionality currently in place. Is there a way to provision a SIP end point within the PBX to look like a line-side T1 or is that just not possible?
- Status
Similar threads
- Question