Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya CM vectors

Status
Not open for further replies.

MoJHK

Systems Engineer
Joined
Nov 16, 2017
Messages
180
Location
HK
Dear expeet,

How to right a script in vector id the incoming calls is no answer and after 10 rings goes to the announcement. The call will drop after the announcement. Thx!
 
I don't think you understand how vectors control calls.

If the call is queuing to a call center skill, then the logic is very simple. It's the same logic that "wait 30 seconds hearing music" and then says "your call is very important to us, please wait". You could just as easily use that logic to "wait 30 seconds hearing music" and then play "your call is not very important to us, so we're dropping it"

That is assuming the vector is in control of the call. A call can be routed to a station/telephone and you would use a coverage path to provide further treatment after X seconds of no answer.

Show us how your call is coming in and where your call is going and I'm sure someone can tell you how to accomplish what you're trying to do.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top