avayatech1986
Technical User
In Avaya aura messaging how can we stop 1 particular MAS server to ensure the rest are working fine.
TIA.
TIA.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Avaya Aura messaging- how to stop 1 out of 4 MAS servers for testing something?
- Thread starter avayatech1986
- Start date
- Status
Unplug the network from it or busy out the trunk group to it.
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Thread starter
- #3
avayatech1986
Technical User
How to identify the trunk group from CM? I mean how do we know which trunk is going to which MAS? there are only 2 SIP trunks (in the route patterns that is routing calls for voicemail)
You should have a signal group for each application server that is taking calls. The signal group should have the IP of the server it is set to send calls to.
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
Ken Means
"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
- Status
Similar threads