Avaya 4612 IP phone and CCM

[punchdown]

We have a lab setup and trying to figure out if we can use an Avaya 4612 IP phone with Cisco Call manager. We are using the G3R as the H.323 gateway for dial tone thru the CLAN board. I know I can manually enter the IP info into the phone , but which settings get applied where on the phone. Upon startup phone asks for DHCP , is 0.0.0.0 default for DHCP?

What IP is for the Call Server?

Call Server Port would be the near end listening port correct? (1719 is default for Avaya I think)

Router IP - should this be the IP of the router holding the VoIP IOS info , call manager or gateway IP on the CLAN?

also asks for File Server IP ?

any help would be greatly appreciated

 

[BuckWeet]

If you want to use the AVAYA IP phone with a CCM cluster, you have to setup the IP station on the G3R and then setup an IP trunk, or do a PRI link to the CCM server..

If you're doing IP Trunking, you need R11 or greater for it to work properly..


BuckWeet