Hey Everyone; I have a new C.I.C.S. I just put in with 7.1, CallPilot 100, and a bogen TPU 65 amplifier. I connected the paging, no problem. I connected the AUX Ring, BP 25, Extension amphenol, to the "contact ring" on the amp, no problem. Before I could program the Aux ringer to a set, service, or line, the ringer is ringing in with all inbound calls, all inbound lines????????? What do I do? Could I have a faulty system? I should let you know, ihave already defaulted it, and confirmed 3 or 4 times that it's wired out to the right stuff. I have never had a problem like this before on one of these systems? Thanks, in advance, Scott.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Aux Ring won't stop????????
- Thread starter 519tech
- Start date
jerryreeve
Vendor
start working the problem with one line only first. select one of the lines and set it to private on a phone you KNOW does not have the aux ring assigned to it and see if that clears the problem. I am hoping that it will and from there it is a case of finding out where the aux ringer is coming from.
----------------------------
Hill?? What hill??
I didn't see any $%@#(*$ Hill!!
----------------------------
JerryReeve
Communication Systems Int'l
com-sys.com
----------------------------
Hill?? What hill??
I didn't see any $%@#(*$ Hill!!
----------------------------
JerryReeve
Communication Systems Int'l
com-sys.com
- Status
